A Lock-and-Kill Anticancer Photoactivated Chemotherapy Agent†

Photosubstitutionally active ruthenium complexes show high potential as prodrugs for the photoactivated chemotherapy (PACT) treatment of tumors. One of the problems in PACT is that the localization of the ruthenium compound is hard to trace. Here, a ruthenium PACT prodrug, [Ru(3)(biq)(STF-31)](PF₆)₂ (where 3 = 3-(([2,2′:6′,2″-ter- pyridin]-4′-yloxy)propyl-4-(pyren-1-yl)butanoate) and biq = 2,2′-biquinoline), has been prepared, in which a pyrene tracker is attached via an ester bond. The proximity between the fluorophore and the ruthenium center leads to fluorescence quenching. Upon intracellular hydrolysis of the ester linkage, however, the fluorescence of the pyrene moiety is recovered, thus demonstrating prodrug cellular uptake. Further light irradiation of this molecule liberates by photosubstitution STF-31, a known cytotoxic nicotinamide phosphoribosyltransferase (NAMPT) inhibitor, as well as singlet oxygen via excitation of the free pyrene chromophore. The dark and light cytotoxicity of the prodrug, embedded in liposomes, as well as the appearance of blue emission upon uptake, were evaluated in A375 human skin melanoma cells. The cytotoxicity of the liposome-embedded prodrug was indeed increased by light irradiation. This work realizes an in vitro proof-of-concept of the lock-and-kill principle, which may ultimately be used to design strategies aimed at knowing where and when light irradiation should be realized in vivo.     

Preparation of Ni–YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC

In this work, we propose the preparation of a duplex anodic layer composed of both a thin (100 nm) and a thick film (10 μm) with Ni–YSZ material. The support of this anode is a metallic substrate, which is the interconnect of the SOFC unit cell. The metallic support limits the temperature of thermal treatment at 800 °C to keep a good interconnect mechanical behaviour and to reduce corrosion. We have chosen to elaborate anodic coatings by sol–gel route coupled with dip-coating process, which are low cost techniques and allow working with moderate temperatures. Thin films are obtained by dipping interconnect substrate into a sol, and thick films into an optimized slurry. After thermal treatment at only 800 °C, anodic coatings are adherent and homogeneous. Thin films have compact microstructures that confer ceramic protective barrier on metal surface. Further coatings of 10 μm thick are porous and constitute the active anodic material.     

Interaction between water-soluble peptidic CdSe/ZnS nanocrystals and membranes: formation of hybrid vesicles and condensed lamellar phases

Due to their tunable optical properties and their well-defined nanometric size, core/shell nanocrystals (quantum dots, QDs) are extensively used for the design of biomarkers as well as for the preparation of nanostructured hybrid materials. It is thus of great interest to understand their interaction with soft lipidic membranes. Here we present the synthesis of water-soluble peptide CdSe/ZnS QDs and their interaction with the fluid lipidic membrane of vesicles. The use of short peptides results in the formation of small QDs presenting both high fluorescence quantum yield and high colloidal stability as well as a mean hydrodynamical diameter of 10 nm. Their interaction with oppositely charged vesicles of various surface charge and size results in the formation of hybrid giant or large unilamellar vesicles covered with a densely packed layer of QDs without any vesicle rupture, as demonstrated by fluorescence resonance energy transfer experiments, zetametry, and optical microscopy. The adhesion of nanocrystals onto the vesicle membrane appears to be sterically limited and induces the reversion of the surface charge of the vesicles. Therefore, their interaction with small unilamellar vesicles induces the formation of a well-defined lamellar hybrid condensed phase in which the QDs are densely packed in the plane of the layers, as shown by freeze-fracture electron microscopy and small-angle X-ray scattering. In this structure, strong undulations of the bilayer maximize the electrostatic interaction between the QDs and the bilayers, as previously observed in the case of DNA polyelectrolytes interacting with small vesicles.     

Redox‐Active‐Ligand‐Mediated Formation of an Acyclic Trinuclear Ruthenium Complex with Bridging Nitrido Ligands

Coordination of a redox‐active pyridine aminophenol ligand to Ru^II followed by aerobic oxidation generates two diamagnetic Ru^III species [ 1 a (cis) and 1 b (trans)] with ligand‐centered radicals. The reaction of 1 a / 1 b with excess NaN₃ under inert atmosphere resulted in the formation of a rare bis(nitrido)‐bridged trinuclear ruthenium complex with two nonlinear asymmetrical Ru‐N‐Ru fragments. The spontaneous reduction of the ligand centered radical in the parent 1 a / 1 b supports the oxidation of a nitride (N^3?) to half an equivalent of N₂. The trinuclear omplex is reactive toward TEMPO‐H, tin hydrides, thiols, and dihydrogen.     

UPLC-MS/MS detection of disaccharides derived from glycosaminoglycans as biomarkers of mucopolysaccharidoses

Mucopolysaccharidoses (MPSs) are a group of disorders resulting from primary defects in lysosomal enzymes involved in the degradation of glycosaminoglycans (GAGs). Depending on the specific enzyme defect, the catabolism of one or more GAGs is blocked leading to accumulation in tissues and biological fluids. GAG measurements are important for high-risk screening, diagnosis, monitoring treatment efficacy, and patient follow up. The dimethylmethylene blue (DMB) spectrophotometric method commonly used in most biochemical genetics laboratories relies on a non-specific total GAG analysis which has led to false positive results, and even false negative results (mainly for MPS III and IV patients). The main objective of our project was to devise and validate a reliable tandem mass spectrometry multiplex analysis for the urine quantitation of four GAGs (dermatan sulfate (DS), heparan sulfate (HS), keratan sulfate (KS), and chondroitin sulfate (CS)) for an eventual technological transfer to the clinic. The developed methodology is rapid (7 min) and our results showed good intraday and interday precision (RSDs ≤ 8.7%) and accuracy (Biases range: −12.0%–18.4%). Linearity was good (r² > 0.995) for DS, HS, CS, and KS calibration curves. In comparison with the DMB spectrophotometric method, this multiplex tandem mass spectrometry method allows GAG fractionation, thus a differentiation of MPS types, except for MPS I and II which are characterized by the same GAG profile. The devised method is a useful and reliable tool for diagnosis of MPS patients, as well as their monitoring and follow up, as shown by longitudinal studies.     

Positioning a Carbon–Fluorine Bond over the π Cloud of an Aromatic Ring: A Different Type of Arene Activation

It is known that the fluoro group has only a small effect on the rates of electrophilic aromatic substitutions. Imagine instead a carbon–fluorine (C?F) bond positioned tightly over the π cloud of an aryl ring—such an orthogonal, noncovalent arrangement could instead stabilize a positively charged arene intermediate or transition state, giving rise to novel electrophilic aromatic substitution chemistry. Herein, we report the synthesis and study of molecule 1 , containing a rigid C?F???Ar interaction that plays a prominent role in both its reaction chemistry and spectroscopy. For example, we established that the C?F???Ar interaction can bring about a >1500 fold increase in the relative rate of an aromatic nitration reaction, affording functionalization on the activated ring exclusively. Overall, these results establish fluoro as a through‐space directing/activating group that complements the traditional role of fluorine as a slightly deactivating aryl substituent in nitrations.     

New spin-transition-like copper(II)-nitroxide species

Novel copper(II)-nitroxide complexes exhibiting a spin-transition-like behavior have been prepared and characterized. They include meso, chiral, and racemic 2-(3-pyridyl)-nitronyl nitroxides differently substituted in positions 4 and/or 5 by ethyl groups and pyrimidyl nitroxides. Depending on the stoichiometry of the reaction, tetranuclear and binuclear complexes were obtained whose structures are cyclic. The tetranuclear species, which include two intracyclic and two exocyclic metal sites, are similar to the previously reported complex of the tetramethylated analogue, while the binuclear complexes involve only endocyclic metal ions and have uncoordinated N-oxyl groups. The tetranuclear complexes exist as two isomers depending on the temperature of crystallization: at room temperature, N-oxyl ligand coordination is axial-axial, while it is axial-equatorial at low temperature. Unexpectedly, this isomerism concerns N-oxyl bonding to the exocyclic metal centers for the derivatives of 4,5-diethyl-substituted ligands while it involves the endocyclic metal site in the complex of the monoethylated ligand, which converts reversibly from a high-spin state to a low-spin state, as observed for the complex of the tetramethylated ligand. Binuclear complexes are diamagnetic at room temperature but convert to a paramagnetic state on warming (90-110 degrees C); the transition is irreversible and sharp.     

Experimental and Theoretical Insights into the Optical Properties and Intermolecular Interactions in Push-Pull Bromide Salts

Experimental and theoretical insights into the nature of intermolecular interactions and their effect on optical properties of 1-allyl-4-(1-cyano-2-(4-dialkylaminophenyl)vinyl)pyridin-1-ium bromide salts ( I and II ) are reported. A comparison of optical properties in solution and in the solid-state of the salts ( I and II ) with their precursors ( Ia and IIa ) is made. The experimental absorption maxima (λ_max) in CHCl₃ is at 528 nm for I and at 542 nm for II , and a strong bathochromic shift of ∼110 nm is observed for salts I and II compared with their precursors. The absorption bands in solid-state at ∼627 nm for I and at ∼615 nm for II that are assigned to charge transfer (CT) effect. The optical properties and single crystal structural features of I and II are explored by experimental and computational tools. The calculated λ_max and the CT are in good agreement with the experimental results. The intermolecular interactions existing in the crystal structures and their energies are quantified for various dimers by PIXEL, QTAIM and DFT approaches. Three types of interactions, (i) the cation⋅⋅⋅cation interactions, (ii) cation⋅⋅⋅anion interactions and (iii) anion⋅⋅⋅anion interactions are observed. The cationic moiety is mainly destabilized by C−H⋅⋅⋅N/π and π⋅⋅⋅π interactions whereas the cation and anion moiety is predominantly stabilized by strong C−H⋅⋅⋅Br⁻ interactions in both structures. The existence of charge transfer between cation and anion moieties in these structures is established through NBO analysis.     

Evaluation of porous graphitic carbon stationary phase for simultaneous preconcentration and separation of organic and inorganic selenium species in "clean" water systems

A high performance liquid chromatography procedure, based on porous graphitic carbon stationary phase, was evaluated for simultaneous on-line preconcentration and separation of organic and inorganic selenium species. Detection was achieved by inductively coupled plasma mass spectrometry with collision/reaction cell (ICP-CRC-MS). Different concentrations of formic acid were tested as mobile phase. A 240 mmol L(-1) concentration with pH adjusted to 2.6, allowed the separation of five species, i.e. selenite, selenate, selenomethionine, selenocystine and selenoethionine. On-line preconcentration of these five species was achieved when heptafluorobutyric acid was used as injection medium, inducing an enrichment of solutes at the top of the column which allowed large volumes (up to 1 mL) to be injected. Combining these injection conditions and 80Se monitoring with ICP-CRC-MS, detection limits between 2 and 8 ng (Se)L(-1), depending on the species, were obtained. Because of the extremely low detection limits obtained, the method was successfully applied to mineral waters.